MAD Racing Parts 8 Channel Input Expansion Block MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare
MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts Dual 8 Channel Input Expansion Block MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare
MAD Racing Parts | sku: MADFordTPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ1A J1A Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ1B J1B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ2A J2A Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ2B J2B Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ3 J3 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ4 J4 Connector MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts MAD Racing Parts Can EGT Kit MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts 8 Channel Input Expansion Block 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plug, and 34 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $96.00 - $172.00 Choose Options Compare
MAD Racing Parts | sku: MADBanner10VMSD Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 Banner 0-20" Laser Ride Height Sensor for MSD GRID7730/7530/7531 *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. We set this one up to trigger... MSRP: Now: $435.00 Choose Options Compare MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts Dual 8 Channel Input Expansion Block Dual 8 Channel Input Expansion Block Brand new design, mounts are now positioned at a 90º angle. Comes with block, matching plugs, and 68 crimp pins. Cable is optional and additional cost... MSRP: Was: Now: $189.00 - $325.00 Choose Options Compare
MAD Racing Parts | sku: MADFordTPS Ford Style TPS Ford Style TPS MSRP: Now: $80.00 Add to Cart Compare MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts Holley O2 Extension Harness Holley O2 Extension Harness MSRP: Was: Now: $95.00 - $105.00 Choose Options Compare
MAD Racing Parts | sku: HolleyJ1A J1A Connector J1A Connector J1A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ1B J1B Connector J1B Connector J1B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ2A J2A Connector J2A Connector J2A Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ2B J2B Connector J2B Connector J2B Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ3 J3 Connector J3 Connector J3 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: HolleyJ4 J4 Connector J4 Connector J4 Connector for Holley ECU. MSRP: Now: $16.00 Add to Cart Compare MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: LT110 Loop Research LT110 – Laser Ride Height Sensor 0-40" Loop Research LT110 – Laser Ride Height Sensor 0-40" *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options. Mounting bracket not included. The... MSRP: Now: $499.99 Choose Options Compare MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: LT210 Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor Loop Research LT210 – Laser Ride Height Sensor 0-40" with Track Temperature Sensor *Laser is sold individually. For a complete kit, add a Cable and Bracket using the dropdown options... MSRP: Now: $625.00 Choose Options Compare MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MADCANBUSLaserCable MAD Holley Can Bus Laser Cable 8ft Long MAD Holley Can Bus Laser Cable 8ft Long This cable is used for the MAD ToF Sensor to be CANBUS compatible. NOTE: Your MAD ToF laser must be updated to V2.2 firmware to use this cable. Setup... MSRP: Now: $105.00 Add to Cart Compare MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts MAD Racing Parts Can EGT Kit MAD Racing Parts Can EGT Kit Plug-n-play with Fueltech, Haltech, and Holley systems using the same box. Other ECU's to be added later. No more type-K mini plugs! We built this with Wago... MSRP: Now: $1,584.00 Choose Options Compare MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MADIRTemp MAD Racing Pro-Series IR Track/Tire Temperature Sensor MAD Racing Pro-Series IR Track/Tire Temperature Sensor *Sensor is sold individually (with hardware). For a complete kit, add a bracket using the dropdown option. Scaling: 0 volts = 32°F 5... MSRP: Now: $210.00 Choose Options Compare MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MADLaser MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus MAD Racing TOF Laser Distance Sensor 38" Range, For Any Brand ECU & Holley Canbus *Laser is sold individually. For a complete kit, add a cable and bracket using the dropdown options. This laser... MSRP: Now: $392.00 Choose Options Compare MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MAD90LaserCable Molded 4Pin Laser Cable 90° Boot on End 10ft Long Molded 4Pin Laser Cable 90° Boot on End 10ft Long 10ft 90° 4pin harness for lasers. MSRP: Now: $36.00 Add to Cart Compare MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected × OK
MAD Racing Parts | sku: MADStrLaserCable Molded 4Pin Laser Cable Straight Boot on End 10ft Long Molded 4Pin Laser Cable Straight Boot on End 10ft Long 10ft straight 4pin harness for lasers. MSRP: Now: $31.00 Add to Cart Compare MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected
MAD Racing Parts NTK O2 Sensor Calibrated for Holley HP and Dominator NTK O2 Sensor Calibrated for Holley HP and Dominator We have developed a replacement NTK oxygen sensor for Holley Dominator and HP. Each one is individually calibrated and then live tested to your... MSRP: Now: $259.00 Choose Options Compare MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare Compare Selected
MAD Racing Parts Pro-Series Short Weld Bung Pro-Series Short Weld Bung Short weld bung, for 1/4" probe. MSRP: Was: Now: $11.00 - $85.00 Choose Options Compare
